Topocentras
Krepšelis tuščias
Topocentras
Krepšelis tuščias

Leitz iLAM Office Pro A3 sidabrinis laminatorius

Šią prekę rasite tik internete.
Mokėkite dalimis:
9.20 € / mėn
Trukmė
36
Pavyzdžiui, skolinantis 244 €, kai sutartis sudaroma 36 mėn. terminui, metinė palūkanų norma – 0.00%, sutarties sudarymo mokestis – 0.00%, sutarties administravimo mokestis – 0.99%, BVKKMN – 22.76%, bendra mokėtina suma – 331 €, mėnesio įmoka – 9.20€.
Galimi pristatymo būdai
Pristatymas kurjeriu
Nemokamai
lapkričio 6-11 d.
Apsaugokite savo įrenginį
Leitz iLAM Office Pro A3 sidabrinis laminatorius
4002432113545
999914003816
LEITZ
244.00 €
EUR

Prekės aprašymas

*Nuotraukos pateikiamos tik iliustraciniais tikslais. Pateikta informacija gali skirtis priklausomai nuo regiono ar šalies.

Bendra informacija

Leitz iLAM Office Pro A3 Karštas laminatorius 800 mm/min Pilka, Sidabras
Brand: Leitz
Produkto pavadinimas: iLAM Office Pro A3
Prekės kodas: 75180084
EAN/UPC kodas: 4002432113545
  • Karštas laminatorius
  • Maksimalus laminavimo plotis: 33 cm Maksimalus storis-dokumento: 0,6 mm
  • 800 mm/min
  • 100 µm
  • Velenėlių skaičius: 4
  • A3
  • Pilka, Sidabras

Specifikacijos

Savybės
Tipas
Characteristics of the device.
Karštas laminatorius
Laminavimo sparta
The speed at which the device laminates documents.
800 mm/min
Maksimalus laminavimo plotis
The maximum width which can be laminated (covered with a layer of protective material e.g. plastic).
33 cm
Didžiausias dangos (plėvelės) storis
The maximum thickness of the laminating film that the device can process, measured in µm.
100 µm
Minimalus maišelio storis
The smallest thickness of the laminating pouch that the device can process, measured in µm.
75 µm
Didžiausias aplanko storis
The maximum thickness of the laminating pouch that the device can process, measured in microns (e.g. 125).
175 µm
Maksimalus storis-dokumento
The maximum supported thickness of the document.
0,6 mm
Įmontuotas ekranas
A display which is part of the product
Laminavimo laikas
The amount of time required to complete a single cycle, typically measured in seconds.
23 s
Velenėlių skaičius
The total quantity of rollers integrated into the device.
4
Pašildymo trukmė
The duration required for the device to reach its optimal operating temperature, typically measured in seconds or minutes.
1 min
Formatas
The format is determined by shape
A3
Temperatūra (maks)
The maximum operating or storage temperature the unit can withstand, measured in °C.
150 °C
Produkto spalva
The colour e.g. red
Pilka, Sidabras
Korpuso medžiaga
What the casing of the product is made of.
Akrilonitrilo butadieno stirenas (ABS)
Valdymo tipas
The way in which the device is controlled.
Jutiklinis
Indikacijos šviesa
Indicates whether the product features a visual light to signal its current status or power state.
Savybės
Variklio reverso funkcija
Indicates whether the motor can be operated in the opposite direction to facilitate movement or clear obstructions.
Sertifikavimas
Specifies the official standards, safety approvals, or regulatory certifications the product has received.
CE
Energijos valdymas
Energijos suvartojimas
Amount of power consumed by this model
1400 W
AC įėjimo įtampa
The voltage of the AC electricity that is inputted into the product.
220-240 V
AC įėjimo dažnis
The range of alternating current frequencies the device can accept from the power source, measured in hertz (e.g., 45 - 65).
50/60 Hz
Svoris ir matmenys
Plotis
The measurement or extent of something from side to side.
510 mm
Ilgis
The distance from the front to the back of something.
155 mm
Aukštis
The measurement of the product from head to foot or from base to top.
115 mm
Svoris
Weight of the product without packaging (net weight). If possible
4,55 kg
Pakuotės duomenys
Pakuotės plotis
The distance from one side of the packaging to the other.
224 mm
Pakuotės gylis
The distance from the front to the back of the packaging.
580 mm
Pakuotės aukštis
The distance from the top to the bottom of the packaging.
164 mm
Paketo svoris
Weight of the packaged product.
4,64 kg
Kitos savybės
Kilmės šalis
Country where the device is made. Aka Country of manufacture (COM).
Kinija

Specifikacija

Bendrosios charakteristikos:
Prekės kodas999914003816
Barkodas4002432113545
Gamintojo kodas75180084
GamintojasLEITZ
Garantija (mėn.)24
*Nuotraukos ir video nuorodos pateikiamos tik iliustraciniais tikslais. Pateikta informacija ir komplektacija gali skirtis priklausomai nuo regiono ar šalies. Prekės pavadinimas pateiktas tiekėjų kaip ir prekių spalva, parametrai, matmenys ir/arba kitos savybės gali atrodyti kitaip ir skirtis nuo originalios prekės, todėl prašome vadovautis prekių savybėmis pagal pateiktą gamintojo barkodą/gaminio kodą. Prekių kiekis ribotas.