Topocentras
Krepšelis tuščias
Topocentras
Krepšelis tuščias

Laminatorius HP HPL3161A3400-14

Šią prekę rasite tik internete.
Paskubėkite! Liko mažiau nei 5 vnt.
Galimi pristatymo būdai
Pristatymas kurjeriu
3,49 €
lapkričio 25-30 d.
Pristatymas į paštomatą
lapkričio 25-30 d.
2,99 €
lapkričio 25-30 d.
2,99 €
lapkričio 25-30 d.
2,99 €
Apsaugokite savo įrenginį
Laminatorius HP HPL3161A3400-14
4030152031610
999914001929
HP
55.99 €
EUR

Prekės aprašymas

*Nuotraukos pateikiamos tik iliustraciniais tikslais. Pateikta informacija gali skirtis priklausomai nuo regiono ar šalies.

Bendra informacija

HP lamineer apparaat OneLam 400 A3 Karštas laminatorius 600 mm/min Balta
Brand: HP
Produkto pavadinimas: lamineer apparaat OneLam 400 A3
Prekės kodas: 3161
EAN/UPC kodas: 4030152031610
  • Karštas laminatorius
  • Maksimalus laminavimo plotis: 33 cm Maksimalus storis-dokumento: 0,5 mm
  • 600 mm/min
  • 125 µm
  • Velenėlių skaičius: 2
  • A3
  • Automatinis išjungimas
  • Balta

Specifikacijos

Savybės
Tipas
Characteristics of the device.
Karštas laminatorius
Laminavimo sparta
The speed at which the device laminates documents.
600 mm/min
Maksimalus laminavimo plotis
The maximum width which can be laminated (covered with a layer of protective material e.g. plastic).
33 cm
Minimalus juostelės storis
The smallest possible thickness of the applied layer or material, measured in microns or millimetres (e.g. 25 microns).
75 µm
Didžiausias dangos (plėvelės) storis
The maximum thickness of the laminating film that the device can process, measured in µm.
125 µm
Minimalus maišelio storis
The smallest thickness of the laminating pouch that the device can process, measured in µm.
75 µm
Didžiausias aplanko storis
The maximum thickness of the laminating pouch that the device can process, measured in microns (e.g. 125).
125 µm
Maksimalus storis-dokumento
The maximum supported thickness of the document.
0,5 mm
Įmontuotas ekranas
A display which is part of the product
Laminavimo sistema
The method used to seal the protective layer, such as using a thermal pouch or a cartridge system.
Krepšelis
Velenėlių skaičius
The total quantity of rollers integrated into the device.
2
Pašildymo trukmė
The duration required for the device to reach its optimal operating temperature, typically measured in seconds or minutes.
4 min
Formatas
The format is determined by shape
A3
Temperatūra (maks)
The maximum operating or storage temperature the unit can withstand, measured in °C.
150 °C
Produkto spalva
The colour e.g. red
Balta
Valdymo tipas
The way in which the device is controlled.
Mygtukai
Automatinis budėjimo režimas
The device automatically switches to standby after a period of inactivity. Standby is an operational mode of an electrical appliance in which the power is switched on but the appliance is not actually functioning. It uses less power than when the device is fully switched on.
Automatinis išjungimas
The device switches itself off automatically after a certain activity
Savybės
Automatiškai išsijungia po
The duration of inactivity before the device automatically shuts down to conserve energy, typically measured in minutes.
30 min
Parengties indikatoriaus
Indicates whether the device features a visual signal to show that it is powered on and prepared for operation.
Energijos valdymas
Energijos suvartojimas
Amount of power consumed by this model
400 W
AC įėjimo įtampa
The voltage of the AC electricity that is inputted into the product.
220 - 240 V
AC įėjimo dažnis
The range of alternating current frequencies the device can accept from the power source, measured in hertz (e.g., 45 - 65).
50 Hz
Srovė
The amount of electrical current flowing through the device, measured in amperes (A).
1,74 A
Svoris ir matmenys
Plotis
The measurement or extent of something from side to side.
460 mm
Ilgis
The distance from the front to the back of something.
140 mm
Aukštis
The measurement of the product from head to foot or from base to top.
86 mm
Svoris
Weight of the product without packaging (net weight). If possible
1,77 kg
Pakuotės duomenys
Pakuotės plotis
The distance from one side of the packaging to the other.
499 mm
Pakuotės gylis
The distance from the front to the back of the packaging.
190 mm
Pakuotės aukštis
The distance from the top to the bottom of the packaging.
126 mm
Paketo svoris
Weight of the packaged product.
2,12 kg
Pakuotės turinys
Pridedami laminavimo vokai
Indicates whether the product is supplied with laminating pouches.
Laminavimo vokų skaičius
The total quantity of protective plastic sleeves included with the product.
15

Specifikacija

Bendrosios charakteristikos:
Prekės kodas999914001929Maksimalus storis-dokumento (mm)0.5
Barkodas4030152031610Maksimalus laminavimo plotis (mm)330
Gamintojo kodasHPL3161A3400-14Laminavimo sparta (mm/min)600
GamintojasHPDidžiausias aplanko storis (µm)125
Garantija (mėn.)24Minimalus maišelio storis (µm)75
*Nuotraukos ir video nuorodos pateikiamos tik iliustraciniais tikslais. Pateikta informacija ir komplektacija gali skirtis priklausomai nuo regiono ar šalies. Prekės pavadinimas pateiktas tiekėjų kaip ir prekių spalva, parametrai, matmenys ir/arba kitos savybės gali atrodyti kitaip ir skirtis nuo originalios prekės, todėl prašome vadovautis prekių savybėmis pagal pateiktą gamintojo barkodą/gaminio kodą. Prekių kiekis ribotas.